Step-by-Step Guide: Installing Suspension Parts on Your Ford Bronco



Do you own a Ford Bronco that you cherish and want to customize to your liking? At times you may encounter suspension issues or simply seek to improve your vehicle's off-road performance with a set of high-quality suspension parts. But let's face it; finding a trustworthy guide on how to install Ford Bronco suspension parts can feel like looking for a needle in a haystack.

You need a solution crafted just for you - an easy-to-follow guide that simplifies the process, saving you time, money, and trips to the mechanic.

Brief Overview of the Article

In this step-by-step guide, we bridge that knowledge gap, providing crystal clear instructions and useful tips on how to install Ford Bronco suspension parts. From understanding your Bronco's unique HOSS 1.0 Suspension System to dealing with the infamous suspension issues on the Bronco Sport, we've got you covered. We will also delve into the repetitive lift kit installation debates and provide guidance on effectively replacing those vital front end components.

Introduction to Rad Bronco Parts

Here at Rad Bronco Parts, we're not just about selling high-quality Bronco parts, we believe in empowering you, our fellow Bronco enthusiasts, by providing educational resources that make maintaining and upgrading your Bronco a breeze.

So, buckle in, as we take a thrilling ride into the world of Bronco suspension systems. Let's kickstart your Ford Bronco upgrade journey together!

Infographic - Steps to Install Ford Bronco Suspension Parts - how to install Ford Bronco suspension parts infographic step-infographic-4-steps

  • Understand your Bronco's suspension system: Familiarize yourself with the HOSS 1.0 Suspension System and possible suspension issues.
  • Prepare for the installation: Gather necessary tools and equipment while adhering to safety precautions.
  • Install a lift kit: Choose a lift kit that fits your Bronco's specifications and follow the installation process.
  • Replace front end components: Identify components to replace and follow the guided steps.
  • Install Eibach Pro-Truck Stage 2 Coilovers and RPG Offroad Suspension components: Understand the benefits and follow the guide to installation.
  • Post-installation tips and maintenance: Properly adjust the coilovers, remember to align post-installation, and maintain the system to ensure longevity.

Your Ford Bronco is just a few steps away from having a brand-new suspension system installed by you, in your own garage. Let's get started!

Understanding the Suspension System of Ford Bronco

Before you learn how to install Ford Bronco suspension parts, it's important to understand the basics of the Bronco's suspension system.

Overview of HOSS 1.0 Suspension System

The Ford Bronco utilizes a High-Performance Off-Road Stability Suspension (HOSS) system, which comes standard across all models. This system features independent front suspension, high coil springs at each corner for improved articulation, and HOSS-tuned heavy-duty dampers. This combination ensures better stability on both on-road and off-road terrains.

The entry-level HOSS 1.0 Suspension System is standard on the Ford Bronco Base, Outer Banks, and Black Diamond trim levels. This system is specifically designed for high-speed trail rides, ensuring a smooth and comfortable journey regardless of the terrain.

Suspension Issues on Bronco Sport and How to Address Them

Like any vehicle, the Bronco Sport can have its share of suspension issues. One common problem revolves around the rear suspension modules. If these modules are not fully secured to the subframe, it can affect the SUV's stability, increasing the risk of an accident. This situation also compromises rear-impact crash performance, increasing the risk of injury.

To address this issue, you need to ensure that the rear suspension modules are securely bolted to the subframe. If the bolts are loose or missing, they should be replaced immediately. Following this, regularly inspecting the suspension system for any signs of looseness or damage can help prevent future issues.

Remember, working on your Bronco's suspension system requires a basic understanding of the vehicle's mechanics. But don't worry, we're here to guide you through the process of how to install Ford Bronco suspension parts yourself. If you're unsure about any steps or need further assistance, don't hesitate to reach out to our team at Rad Bronco Parts.

Preparing for the Installation of Suspension Parts

Before we dive into how to install Ford Bronco suspension parts, let's gather the necessary tools and equipment. You'll also need to follow some safety precautions. Although the process is straightforward with a bit of mechanical knowledge, safety should always be your priority.

Necessary Tools and Equipment

You'll need a variety of tools for this installation process. Here's an essential list to get you started:

  • Socket set
  • Torque wrench
  • Hydraulic jack and jack stands
  • Pry bar
  • Spanner wrench for adjusting coilovers
  • An OBD scanner/reader (for post-installation checks)

For specific suspension components like the Eibach Stage 2 Coilover lift kit, the manufacturer will provide a list of necessary tools in the installation guide.

Safety Precautions and Tips

Safety first! When working on your Bronco's suspension, keep these safety measures in mind:

  • Always work on a flat, stable surface.
  • Use the hydraulic jack and jack stands to lift and secure your Bronco. Never work under a vehicle supported only by a jack.
  • Wear safety glasses and gloves.
  • Keep your workspace clean and organized to prevent accidents.
  • Refer to the manufacturer's manual or contact us for specific torque specifications. Over-tightening can lead to component failure.

Now that you're armed with the necessary tools and safety tips, you're ready to start installing your Bronco's new suspension parts. Remember, the aim here is not just to enhance your Bronco's performance but also ensure a safe and fun off-road experience. So, let's get started!

Installing a Lift Kit on Your Ford Bronco

Choosing the Right Lift Kit for Your Bronco

Before you jump into learning how to install Ford Bronco suspension parts, it's crucial you select the right lift kit for your vehicle. At Rad Bronco Parts, we offer a diverse range of lift kits that are designed specifically for the Ford Bronco. Our selection includes the Belltech 0 to 4-Inch Suspension Lift Kit with Trail Performance Coil-Overs, which offers exceptional durability and adjustable performance to suit any terrain.

Each lift kit provides different benefits, so it's essential to consider your Bronco's specific needs and your driving habits. Do you often tackle rough terrain or prefer high-speed trail rides? Do you want to fit larger wheels and tires? These factors will help determine the best lift kit for your vehicle.

Step-by-Step Guide to Installing a Lift Kit

When it comes to understanding how to install Ford Bronco suspension parts, patience and precision are key. Here's a step-by-step guide to installing a lift kit:

  1. Preparation: Safely lift and secure your Bronco, then remove the wheels.

  2. Removal of Old Suspension: Identify the lower and upper rear link and start the disassembly. Support the rear end with a jack as you'll need to adjust it to fit the new links.

  3. Installing the Lift Kit: Start by assembling the links for your lift kit. For instance, with the RPG lower links, install one C-clip and press in the spherical bearings. Make sure these press flat and entirely to avoid damaging the link. Once these are pressed in, you can finish by installing a C-clip on the other side.

  4. Attach New Suspension: Once you've prepared your lift kit, attach it to your Bronco. You will need to raise or lower the rear end, as needed, to suit the new links.

  5. Post-Installation Checks: Once you've installed the new suspension, it's time to run some checks. Make sure all parts are securely fitted and that all bolts are tightened.

Remember, while this guide provides a basic overview, the exact process can vary depending on the specific lift kit you're installing. We recommend reading the detailed instructions that come with your kit carefully. If you're unsure about any aspect of the installation, it's best to consult a professional.

By following this guide, you can enhance your Bronco's off-road capabilities and achieve a more aggressive stance. However, proper installation is critical to ensure safety and optimum performance. So, if you're unsure about any aspect of the process, don't hesitate to seek professional help.

Replacing Front End Components

When it comes to how to install Ford Bronco suspension parts, one of the essential steps is replacing the front end components. This includes coil springs, shocks, and C bushings. Each of these components plays a crucial role in your Bronco's suspension system, contributing to the vehicle's overall ride quality and performance.

Identifying the Components to be Replaced

Before starting the replacement process, it's vital to identify and inspect the components that need to be replaced.

  • Coil Springs: These are the primary components that absorb shocks and maintain the height of the vehicle. If they are worn out or damaged, you may notice a decrease in ride comfort and stability.
  • Shocks: These components dampen the impact of road bumps and uneven surfaces, providing a smoother ride. They work hand in hand with the coil springs and may need replacement if you notice excessive bouncing or instability.
  • C Bushings: C bushings help in controlling the alignment of the front axle. If these are worn out, they can lead to uneven tire wear and poor handling.

Step-by-Step Guide to Replacing Coil Springs, Shocks, and C Bushings

Here is a simple, step-by-step guide to replacing these components:

  1. Safety First: Always ensure your Bronco is securely lifted off the ground using reliable jacks and jack stands.
  2. Remove Old Components: Start by removing the old coil springs, shocks, and C bushings. It may require a bit of effort and patience, especially if you're dealing with rusted bolts. Using ample WD-40 and a sturdy breaker bar can make the process easier, as one early Bronco enthusiast suggested on a forum.
  3. Install New Coil Springs: Once the old springs are removed, place the new coil springs in position. Make sure they are correctly aligned with the suspension system.
  4. Install New Shocks: Next, attach the new shocks. Ensure they are securely bolted to the vehicle's frame and the axle.
  5. Install New C Bushings: Lastly, replace the old C bushings with the new ones. Ensure they are tightly secured for optimum performance.
  6. Double-check Everything: Once everything is in place, double-check all bolts and connections to make sure they are tight and secure.

Bear in mind that replacing these components can be a challenging task, especially for beginners. If you're unsure about any aspect of the process, feel free to reach out to us for assistance.

After installing these new parts, it's time to move on to adjusting the coilovers and making sure your Bronco is leveled correctly. We'll go over these steps in the following sections.

Installing Eibach Pro-Truck Stage 2 Coilovers and RPG Offroad Suspension Components

In this section, we delve into the specifics of how to install Ford Bronco suspension parts, particularly the Eibach Pro-Truck Stage 2 Coilovers and RPG Offroad Suspension Components. These are both top-tier upgrades for your Bronco that promise to enhance your vehicle's off-road performance and maneuverability.

Overview of Eibach Pro-Truck Stage 2 Coilovers and RPG Offroad Suspension Components

The Eibach Pro-Truck Stage 2 Coilovers are an excellent upgrade for your Bronco's suspension, offering significant gains in height and ground clearance. This kit includes front and rear coilovers that provide a smoother ride and improved stability, especially when navigating rough terrains.

On the other hand, the RPG Offroad Suspension Components include Rear Upper and Lower Links, as well as Front Upper Control Arms and Tie Rods Kits. These parts enhance your vehicle's suspension system and contribute to better handling and off-road performance.

These components are designed for easy installation and are made from heavy-duty aluminum for durability. Plus, they're backed by a limited lifetime warranty, giving you peace of mind that you're investing in quality parts.

Step-by-Step Guide to Installing Eibach Coilovers and RPG Components

Installing these suspension parts on your Bronco is a straightforward but meticulous process. Here is a step-by-step guide on how to go about it:

  1. Preparation: Start by safely lifting and securing your Bronco, then remove the wheels. Make sure you have all the necessary tools and components for the installation.

  2. Assemble the Links: Before starting on the vehicle, assemble the links as much as possible. This includes installing c-clips and pressing in the spherical bearings on the RPG lower links. Ensure these press flat and completely to avoid damaging the link itself.

  3. Identify the Links: Identify the lower and upper rear link on your Bronco. Once identified, you can start the disassembly. You'll need to support the rear end with a jack, as you'll need to lift and lower the rear as needed to suit the new links.

  4. Remove the Fuel Tank (Optional): This is an optional step but can make the process easier. Support the fuel tank with a large surface area jack and then loosen (but do not remove) the 8 bolts that secure the tank.

  5. Install the Coilovers: Follow the detailed instructions provided with the Eibach Pro-Truck Coilover Stage 2 kit to install the coilovers.

  6. Install the RPG Components: Install the RPG Offroad Suspension components, ensuring each part is securely fitted. Follow the manufacturer's instructions for this process.

Remember, a professional installation is recommended due to the complexity of this job. If you feel uncertain at any point, don't hesitate to seek professional help.

Once you've successfully installed these suspension parts, you'll immediately notice an improvement in your Bronco's performance and handling. And remember, regular maintenance is key to keeping your suspension system in optimal condition. In the next section, we'll provide some tips on how to adjust your coilovers and maintain your suspension system.

Post-Installation Tips and Maintenance

After successfully learning how to install Ford Bronco suspension parts, it's crucial to perform some steps to ensure everything is working correctly and will last longer. Here are some tips on maintaining your Bronco's suspension system:

Adjusting the Coilovers to Level the Truck

Proper coilover adjustment is critical to leveling your truck. After installing and tightening everything, drive the truck a few feet to let the suspension settle. Then, measure the height of each corner of the truck from the ground to the start of the fender flare. This will give you a rough estimate of where each coilover needs to be adjusted.

When adjusting your coilovers, it's much easier and less destructive to lift the truck off the ground just to take the weight off of the spring perch. While it is possible to adjust it with the truck on the ground, there is always more of a chance to damage the threads or where the spanner wrench fits. This step will ensure your truck is leveled out perfectly.

Importance of Post-Installation Alignment

A common mistake after installing suspension parts is neglecting alignment. However, proper alignment is crucial to ensure your truck drives straight and doesn't cause premature tire wear. After adjusting the coilovers and leveling the truck, it's time to head to the alignment shop.

An alignment will ensure that your Bronco goes down the road straight as an arrow, providing you with a safer and smoother ride. This step is not to be skipped as it plays a significant role in the performance of your truck.

Maintaining Your Bronco's Suspension System

Keeping your Ford Bronco in top shape requires regular checkups and routine maintenance. Change things like engine oil, spark plugs, and cabin air filters regularly. Monitoring other vital fluids and evaluating certain wear items, like brake pads and tires, should also be part of your routine maintenance schedule.

Any part or subassembly that starts to show signs of wear or becomes unreliable should be promptly dealt with before it affects other components and reduces the lifespan of your vehicle. By following these maintenance protocols and keeping up with regular servicing, you ensure that your Ford Bronco remains reliable for years to come.

In conclusion, knowing how to install Ford Bronco suspension parts is just part of the process. Post-installation adjustments, alignment, and regular maintenance are equally important to ensure your Bronco runs smoothly and efficiently for years. If you need any help with your Bronco, whether it's engine, exhaust, suspension, or aesthetic-related, feel free to reach out to us at Rad Bronco Parts. We can guide you on the right path in no time.

Ford Bronco Suspension - how to install Ford Bronco suspension parts


Recap of the Installation Process

In this guide, we have walked you through a step-by-step process of how to install Ford Bronco suspension parts. We began by giving you an understanding of the Ford Bronco suspension system and the importance of upgrading it with a lift kit. We then took you through the process of replacing front-end components, installing Eibach Pro-Truck Stage 2 Coilovers and RPG Offroad Suspension Components, and adjusting the coilovers to level the truck.

Remember, every step taken in this guide, from disassembling the OE tie rod to adjusting the coilovers, is crucial in ensuring the successful installation of your Bronco's suspension parts. It's also worth noting that the exact steps may vary slightly depending on the specific suspension parts you're installing and the model of your Ford Bronco.

Encouragement for DIY Enthusiasts and Contact Information for Assistance

If you're a DIY enthusiast, taking on the task of installing your Bronco's suspension parts can be both rewarding and cost-effective. However, it's essential to approach the task with caution and patience. Make sure you have all the necessary tools and follow the instructions carefully.

At Rad Bronco Parts, we celebrate the spirit of DIY while also recognizing that sometimes, you may need a little help. If you're unsure about any step in the process or if you need expert advice on choosing the right suspension parts for your Bronco, don't hesitate to reach out to us.

Our team of Ford Bronco experts is always ready to provide assistance, ensuring you have the best experience as you enhance your Bronco's performance. You can rely on us for top-quality Bronco parts, from lift kits to suspension systems, and comprehensive guides on how to install them.

Remember, your Bronco is more than just a vehicle; it's an expression of your adventurous spirit. So, keep exploring, keep enhancing, and most importantly, keep enjoying the Bronco experience!

Ford Bronco in the wild - how to install Ford Bronco suspension parts

Leave a comment

All comments are moderated before being published